Drawing calculator
Architectural scale calculator
Convert a measurement on a printed plan to feet and inches, or work backward from a known length.
Convert a measurement
Enter inches as a decimal or fraction, such as 2.375 or 2 3/8.
2.375 paper inches ÷ 0.25 inches per foot = 9.5 feet.
Did my PDF print to scale?
Print the dimensioned calibration sheet (US Letter PDF) using actual size. Measure its reference line from tick center to tick center. At ¼ inch per foot, its 16-foot dimension should measure exactly 4 inches.
For example, 3.8 inches is 95% of the intended length, or 5% small. Reprint at actual size and measure again before using a printed scale. The coffee shop sheet is marked NTS and is for counting fixtures.
Try the free fixture takeoff →How it works
On a 1/4″ = 1′-0″ drawing, every quarter inch of paper represents one foot in the room. Divide the measured paper inches by the scale in inches per foot. Reverse the operation to find the paper length of a known dimension.
Worked example
Imagine a café counter on a scaled print. At 1/4″ = 1′-0″, a 2 3/8″ line represents 9′ 6″. This separate scale exercise uses an assumed measurement. The Juniper Coffee workbook sheet is marked NTS (not to scale).