Write the scope in the first line of the worksheet

A fixture takeoff is a count of the light fixtures shown within a defined portion of the drawings, grouped into useful order lines. For this exercise, write “The Supply Shop, E-111, issue A, sales floor only.” Keep separate columns for A, B and C so every light has one place to go.

On this plan the sales floor is the large room on the left. Its shared wall with the stockroom and fitting rooms is the count boundary. Locate the six sales-floor fixture tags, RT-101 through RT-106, before entering the quantities.

E-111 · The Supply Shop · Original issue
RT-101 · Type AAdjustable display spot · Sales floorL1-3
RT-105 · Type BLinear strip · Sales floorL1-3
The Supply Shop, E-111 issue A
ScopeType AType BType CTotal
Sales floor4206
Stockroom0202
Fitting rooms0022
Whole store44210

Use two passes while you can still see your marks

On the first pass, mark each sales-floor fixture in a consistent direction. The three top-row fixtures are A. On the second row, RT-104 is A and RT-105 and RT-106 are B. The tally is four adjustable display spots and two linear strips.

On the second pass, read your marks back against the schedule. Six marks should equal the sum of the type columns, 4 + 2 + 0. Write zero for C so the next reader can distinguish a checked category from an unfinished worksheet.

Use a whole-store count to diagnose a scope error

If your answer has four B instead of two, inspect the stockroom. Its two strips are valid fixtures for a whole-store takeoff and fall outside a sales-floor-only order. If you also have two C, the fitting rooms have probably been included.

Keep the room subtotals even if the assignment later expands. Adding the stockroom and fitting-room rows to the sales-floor row gives a complete original-store order of four A, four B and two C. That trail makes a correction easier than starting the count again.

Check your understandingYour sales-floor worksheet totals six, but it lists three A and three B. Has it passed the check?

Check each tag against its assigned type. There are six fixture positions, but the four A tags are RT-101 through RT-104. Only RT-105 and RT-106 are B.

References