Start with two quantities
Give each pair issue A of Juniper Coffee and the fixture schedule. Keep issue B for later. Ask for two quantities a supplier could use, with a mark on the plan for each item. Give the group five minutes before revealing a total.
Listen for the first decision. Some learners will start counting immediately. Others will open the schedule to find out which letter represents a pendant. Ask one of each to explain how they kept track of the pickup counter.
| Fixture type | Issue A | Issue B | Change |
|---|---|---|---|
| A · recessed downlight | 8 | 6 | −2 |
| B · pendant | 4 | 6 | +2 |
| All fixtures | 12 | 12 | 0 |
Trade sheets with a partner
Allow three minutes to reconcile the marks room by room. The seating area accounts for six lights, while prep and washroom together account for three. Ask the partner to find the room that explains the remainder. It is the pickup counter, where one downlight sits between two pendants.
Now write 8 A and 4 B on the board. If a pair has a different answer, have them name the first room where the counts diverge. That narrows the search from twelve tags to a single part of the sheet.
Hand out issue B
Allow four minutes. Ask each pair to leave its original order intact and write a separate change note for the buyer. Two seating fixtures switch from recessed downlights to pendants. The note should identify CS-101 and CS-103 and give the revised quantities.
Use the last three minutes for one question: “If I only told the supplier that the total stayed at twelve, what would arrive?” The original mix would still be two downlights over and two pendants short. That is a concrete reason to preserve both the old and new quantities.
Check your understandingWhich two records would you keep for the debrief?
Keep the marked issue A sheet and the separate issue B change note. They show whether a mistake happened in the original count or while applying the revision.